Following is a list of Machine Features for use with West·Bond Machines, and also for stand alone use.
Rotary Work Platform, "74E"
Rotary Work Platform for "74E" Series. Assembly No. 6720 replaces Assembly No. 6710. Rotates work piece about center of tool travel range. Work Platform remains vertically adjustable. Sold only as a part of machine construction, and not as a stand-alone product.
External View TV Camera for "4kE", "5kE", "7kC", "7kD" & "7kE" Series.
Color External View TV Camera for "4kE", "5kE", "7kC", "7kD" & "7kE" Series. Assembly No. 10375. Magnification is adjustable within a range of 30X to 55X; view angle is adjustable; flat screen monitor & power supply included (for use with 100-220V AC power source); ESD protected.
Available as a stand-alone product. Machines purchased before December of 2003 may require a replacement microscope mount bracket.
Adjustable Height Platform, "7~C"
Adjustable Height Platform for "C" Series. Assembly No. 8557 replaces Assembly No. 8273. Adjusts thru a range of 0.625 in., 0.09275 above and 0.53125 below nominal work elevation.
Adjustable Height Work Platform, with Planarity Control.
Adjustable Height Work Platform, with Planarity Control. Adjusts thru a range of 0.625 in., 0.1250 above and 0.5000 below nominal work elevation. Planarity control of platform is by 3 point adjustment that allows for approximately 2 degree variation in any direction. Assembly No. 10303.
1551 S. Harris Court,Anaheim, CA 92806
Phone: 714.978.1551 Fax: 714.978.0431